True-Nano Technology Defined
The standard scientific definition of the term nano-molecular is any material with an atomic/molecular level ranging from one nanometer (nM) to 100 nM [1 nM = 1 Billionth of a Meter; or approximately 1/80,000 the diameter of a human hair]. We have been told that the prestigious ASTM will be publishing this definition in the very near future. By penetrating to the true, nano-molecular level described, reactions with existing atoms and molecules occur within as well as on the substrate, creating new, molecularly-manipulated structures with extremely desirable and positive different behavior characteristics. This is a new chemistry in the protective coatings industry, extensively disruptive, resulting in vastly superior product performance. These are cutting edge coatings. These True-NanoTechnology coatings have exceptional performance, abilities, and a proven track record in many of these industries. Some of these coatings have been applied in the past for several Fortune 500 companies. These Nano technology applications continue to receive praise for the products performances. These products dramatically increase the lifespan of any substrate to which they are applied. In most cases, applications will be made with the same equipment currently used for said application. These include all nano-scale products which provide permanent solutions to the challenges of severe corrosion, mechanical attack, and weathering which currently plague industrial infrastructure. These are vastly superior protective coatings and are on the forefront technology of nano-molecular manipulation chemistry. These will be the basis for new disruptive approaches/solutions for numerous industry applications.****

U.S. Department of Defense for Example:
Permanent Protection of Ship and Submarine Hulls, Superstructures consisting of Metals, Fiberglass and Carbon Composites; Excellent Increase of Heat and Cold Building Insulation; Fireproofing and Waterproofing; Life Extension and Performance Enhancement of Internal Combustion Engines; Turbine Engine Parts; Nuclear Power Equipment; Armor Safety Improvement of Military Vehicles, Tanks, APVs without the necessity to otherwise vastly increase horsepower, preventing significant cost increases; Military Uniform, Tent and Parachute Waterproof and Fireproofing Treatment; Construction/Restoration - Military Buildings, Warehouses and Floors, Marine Docks, Runways and the like.**************************************

Industrial Floors, Commercial Freezers

Here is a serious money saver!! No need for removal of Freezer from service; One of these Nano technology coatings was apply at 40 degrees f. And c. Below freezing!!! The application is on loading docks: providing total, continual protection against attack from severely aggressive corrosion; mechanical ; thermal shock; ultra-high abrasion; impact; compression, freeze-thaw cycling; etc. Complete , unique protection. There are no corrosives known to attack some of these unique Nano-Technology coatings. The doors are open for manufacturing and warehouse floors, storage areas; These coatings give rapid return to profitable service for the owner, while providing exceptionally durable restoration. **************************************************
Ceramic Cement & Mortar Mixes and Additives.

All of these non-toxic products will not mildew, discolor or pop- out (aggregates loss, leading to concrete potholes) as a result of steam, acid, thermal shock, high-pressure water cleaning, saponification gas pressures, aggressive detergent cleaning processes; These Nano Technology grout products and surface coverings, are replacing notoriously toxic, poisonous, health-threatening coatings, paints and sealants used by dairy, meat processing and other food processing plants; breweries, soft-drink beverages, wineries, distilleries, etc. These new nano technology coatings and sealants will permanently prevent against all deterioration as well as bacteria and mildew build-up. *************************************************************************************************
Two of these Nanotechnology coatings have been Engineered specifically for the Aerospace Industry, they have been developed specifically for the aviation and defense Industries (rockets, missiles, etc.) Sharing many of the unique, significant key properties. Twice as slippery as Teflon.
Applying one of these coatings to aircraft surfaces, speed increases significantly, with exceptional reduction in fuel consumption.
All the treated aircraft surfaces do not support dangerous and deadly icing. This excellent achievement will save all air carriers, passenger and airfreight, several millions of dollars each. With these coatings there is no need for the familiar, time-consuming and expensive deicing treatments. (Boeing 727 and 737 models currently cost nearly $10,000.00 per each ground deicing treatment; 747,757,767,777 and the new 787 Dreamliner, along with Airbus Industries 300 and 500 series aircraft cost about $15,000.00 per trip).


Fiberglass as well as the Fiberglass and carbon fiber composites are vastly strengthened by the use of these nano technology specialty coatings. Many exciting versions will be provided soon, including, but not limited to, fiberglass that is 50% lighter in weight; 50% stronger and fireproof.
These are great days in the world of the Nano products. The only problem with Nano products is they are easily overlooked.

Replying to [Jimmy Neutron ]:

Unfortunately there is something else you overlooked: nanotubes accumulate in the human brain (and of course in animal brains, too) and causes more damage then any illegal drug we know. The FDA is currently witholding a lot of evidence regarding other dangers and damages, and that tells me that once again it's only corporate greed that makes nanotubes look like a blessing to mankind.

Replying to [germex]:These Nano Particulates are the very first of their kind. The ASTM testing Company is setting the standard, and will be eliminating the ability to claim "Nano" technology on all of the products claiming Nano Tech, but are truly Dangerous.
These new Nano technology products have already passed the EPA, OSHA, ISO testing. No NOSH masks, gl ,or gloves are required to handle or apply these products. Please don't think I am not agreeing with you! There are many products that need to be pulled.(Our previous discussion regarding PVC) I know from your endeavors you are convicted in helping the distribution of aggregated truth to help the environment. I have waited 10 years for these products to get all the testing necessary, proving these new and true Nano Technology Coatings and Sealants are GREEN / NEUTRAL for our grandchildrens planet. If you send me a different email address I will send you some "Sleeping Material" with details of the tests and scientific efforts to keep these products "Green". In 5 years FEDERAL MANDATES will require: All products which come into contact with the public must be "GREEN", . Soon many products will begin to do what our Scientist and company has already accomplished.
Only our Scientist has broken the Nano Barrier. 3M, J&J, DOW all tried to discover what he created.

A couple of months ago 3M announced they have stopped R&D on NanoT echnology. They have spent over $50 Million attempting to find TRUE Nano Technology.



The next thing our Scientist is working on is helping me find my keys!

Replying to [Jimmy Neutron ]:

Hi Jimmy,

If your scientist has a minute to spare, please send him over to find a few items I've lost...

Ok, you got my curiosity! So far haven't seen any evidence of any nano technology that wouldn't be harmful to humans and animals alike, but as you insist...

I'll send you my e-mail address via TM, to read those documents you mention. If you found a way around those problems, I really NEED to know (emotionally), as that would be the first line of nano products that stands up to its claims. Would be "tickled to death" if that were true! After all, as long as you don't know of the draw-backs, nano technology sounds really great, and should be!

Replying to [germex]:Our scientist is an expert at finding little things!!
Sorry a little Nano joke
If you send your email address to: Stopgraffiti@cox.net I will send you all of the information I am allowed to disclose. The first few years of Nano were Military in their origins.So health issues were not the priority
These coatings and sealants are the first actual Nano-Technology products. The ASTM Company is actually writing strict scientific specifications which must be met in order for a company to use the Nano word. The Government has issued a mandate to many companies not allowing them to manufacture the so called Nano products anymore.